APM (Advanced Power Management) BIOS support

modulename: apm.ko

configname: CONFIG_APM

Linux Kernel Configuration
└─>Power management and ACPI options
└─>APM (Advanced Power Management) BIOS support
In linux kernel since version 2.6.12  
APM is a BIOS specification for saving power using several different
techniques. This is mostly useful for battery powered laptops with
APM compliant BIOSes. If you say Y here, the system time will be
reset after a RESUME operation, the /proc/apm device will provide
battery status information, and user-space programs will receive
notification of APM "events" (e.g. battery status change).

If you select "Y" here, you can disable actual use of the APM
BIOS by passing the "apm=off" option to the kernel at boot time.

Note that the APM support is almost completely disabled for
machines with more than one CPU.

In order to use APM, you will need supporting software. For location
and more information, read Documentation/power/pm.txt and the
Battery Powered Linux mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.

This driver does not spin down disk drives (see the hdparm(8)
manpage ("man 8 hdparm") for that), and it doesn't turn off
VESA-compliant "green" monitors.

This driver does not support the TI 4000M TravelMate and the ACER
486/DX4/75 because they don't have compliant BIOSes. Many "green"
desktop machines also don't have compliant BIOSes, and this driver
may cause those machines to panic during the boot phase.

Generally, if you don't have a battery in your machine, there isn't
much point in using this driver and you should say N. If you get
random kernel OOPSes or reboots that don't seem to be related to
anything, try disabling/enabling this option (or disabling/enabling
APM in your BIOS).

Some other things you should try when experiencing seemingly random,
"weird" problems:

1) make sure that you have enough swap space and that it is
enabled.
2) pass the "no-hlt" option to the kernel
3) switch on floating point emulation in the kernel and pass
the "no387" option to the kernel
4) pass the "floppy=nodma" option to the kernel
5) pass the "mem=4M" option to the kernel (thereby disabling
all but the first 4 MB of RAM)
6) make sure that the CPU is not over clocked.
7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
8) disable the cache from your BIOS settings
9) install a fan for the video card or exchange video RAM
10) install a better fan for the CPU
11) exchange RAM chips
12) exchange the motherboard.

To compile this driver as a module, choose M here: the
module will be called apm.

source code:
depends
CONFIG_PM_SLEEP
CONFIG_X86_32