CONFIG_ARCH_S3C2410 is not available for thedefaultarchitecture x86.
Result is shown for architecture arm
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450
modulename: setup-i2c.ko
configname: CONFIG_ARCH_S3C2410
ARM system type
└─>Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450
In linux kernel since version 2.6.12
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
Note, the S3C2416 and the S3C2450 are so close that they even share
the same SoC ID code. This means that there is no seperate machine
directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
Note, the S3C2416 and the S3C2450 are so close that they even share
the same SoC ID code. This means that there is no seperate machine
directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
source code:
is selected by
CONFIG_CPU_FREQ_S3C24XXCONFIG_CPU_S3C2412
CONFIG_CPU_S3C2416
CONFIG_CPU_S3C2443
CONFIG_PLAT_S3C24XX
CONFIG_S3C2410_DMA
CONFIG_CPU_S3C2410
CONFIG_SND_S3C24XX_SOC
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650
CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X
CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23
CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES