CONFIG_MXC_DEBUG_BOARD is not available for thedefaultarchitecture x86.
Result is shown for architecture arm
Enable MXC debug board(for 3-stack)
modulename: 3ds_debugboard.ko
configname: CONFIG_MXC_DEBUG_BOARD
Linux Kernel Configuration
└─>Freescale i.MX support
└─>Enable MXC debug board(for 3-stack)
In linux kernel since version 2.6.36 (release Date: 2010-10-20)
The debug board is an integral part of the MXC 3-stack(PDK)
platforms, it can be attached or removed from the peripheral
board. On debug board, several debug devices(ethernet, UART,
buttons, LEDs and JTAG) are implemented. Between the MCU and
these devices, a CPLD is added as a bridge which performs
data/address de-multiplexing and decode, signal level shift,
interrupt control and various board functions.
platforms, it can be attached or removed from the peripheral
board. On debug board, several debug devices(ethernet, UART,
buttons, LEDs and JTAG) are implemented. Between the MCU and
these devices, a CPLD is added as a bridge which performs
data/address de-multiplexing and decode, signal level shift,
interrupt control and various board functions.