CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA is not available for thedefaultarchitecture x86.
Result is shown for architecture arm
Via ODMDATA
configname: CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
Low-level debug console UART
└─>Via ODMDATA
In linux kernel since version 3.1 (release Date: 2011-10-24)
Automatically determines which UART to use for low-level debug based
on the ODMDATA value. This value is part of the BCT, and is written
to the boot memory device using nvflash, or other flashing tool.
When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
0/1/2/3/4 are UART A/B/C/D/E.
on the ODMDATA value. This value is part of the BCT, and is written
to the boot memory device using nvflash, or other flashing tool.
When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
0/1/2/3/4 are UART A/B/C/D/E.