default or selected kernelversion does not have config value CONFIG_PARIDE_KTTI.
Result is shown for kernelversion 6.9.9
KT PHd protocol
modulename: ktti.ko
configname: CONFIG_PARIDE_KTTI
Linux Kernel Configuration
└─>Device Drivers
└─>Block devices
└─>KT PHd protocol
In linux kernel since version 2.6.20 (release Date: 2007-02-04)
This option enables support for the "PHd" parallel port IDE protocol
from KT Technology. This is a simple (low speed) adapter that is
used in some 2.5" portable hard drives. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
protocol driver, otherwise you should answer M to build it as a
loadable module. The module will be called ktti. You must also
have a high-level driver for the type of device that you want to
support.
from KT Technology. This is a simple (low speed) adapter that is
used in some 2.5" portable hard drives. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
protocol driver, otherwise you should answer M to build it as a
loadable module. The module will be called ktti. You must also
have a high-level driver for the type of device that you want to
support.