default or selected kernelversion does not have config value CONFIG_PARIDE_PF.
Result is shown for kernelversion 6.9.9
Parallel port ATAPI disks
modulename: pf.ko
configname: CONFIG_PARIDE_PF
Linux Kernel Configuration
└─>Device Drivers
└─>Block devices
└─>Parallel port ATAPI disks
In linux kernel since version 2.6.20 (release Date: 2007-02-04)
This option enables the high-level driver for ATAPI disk devices
connected through a parallel port. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
parallel port ATAPI disk driver, otherwise you should answer M
to build it as a loadable module. The module will be called pf.
You must also have at least one parallel port protocol driver in
your system. Among the devices supported by this driver are the
MicroSolutions backpack PD/CD drive and the Imation Superdisk
LS-120 drive.
connected through a parallel port. If you chose to build PARIDE
support into your kernel, you may answer Y here to build in the
parallel port ATAPI disk driver, otherwise you should answer M
to build it as a loadable module. The module will be called pf.
You must also have at least one parallel port protocol driver in
your system. Among the devices supported by this driver are the
MicroSolutions backpack PD/CD drive and the Imation Superdisk
LS-120 drive.