default or selected kernelversion does not have config value CONFIG_SCSI_ARCMSR_AER.
Result is shown for kernelversion 6.2.5
Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)
configname: CONFIG_SCSI_ARCMSR_AER
Linux Kernel Configuration
└─>Device Drivers
└─>SCSI device support
└─>SCSI low-level drivers
└─>Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)
In linux kernel since version 2.6.24 (release Date: 2008-01-24)
The advanced error reporting(AER) capability is "NOT" provided by
ARC1200/1201/1202 SATA RAID controllers cards.
If your card is one of ARC1200/1201/1202, please use the default setting, n.
If your card is other models, you could pick it
on condition that the kernel version is greater than 2.6.19.
This function is maintained driver by Nick Cheng. If you have any
problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
To enable this function, choose Y here.
ARC1200/1201/1202 SATA RAID controllers cards.
If your card is one of ARC1200/1201/1202, please use the default setting, n.
If your card is other models, you could pick it
on condition that the kernel version is greater than 2.6.19.
This function is maintained driver by Nick Cheng. If you have any
problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
To enable this function, choose Y here.